| Equipment performance and main parameters |
| Equipment operating cycle |
seconds |
| Equipment operator |
1 person |
| Equipment noise |
≤75db |
| Overall production line net size |
Length 5000mm * Width 2200mm * Height 1800mm |
| Power supply standards |
AC 220V,50HZ |
| Gas supply methods and standards |
Seamless steel pipe segmented supply, 0.5~0.8Mp |
| Main standard parts brand configuration |
| Pneumatic components |
SMC |
| Sensor |
Panasonic |
| Programmable logic controller |
KEYENCE |
| Servo motor |
YASKAWA |
| Touch panel |
PROFACE |
| Visual camera |
KEYENCE |
| Low voltage electrical components |
Schneide |
ST001 rotary conveyor belt
Overview:
Knob feeding conveyor, PLC logic control.
Composition: servo motor, synchronous belt, sensor, self-made tooling
Action description:
Manually place the knobs in the designated direction onto the conveyor belt, which transports the knobs to the interior of the equipment.
ST002 Cam conveying module
Overview:
The cam automatically transports to the product carrier
Composition: Vibration disk, cylinder
Action description:
Manually place the cam onto the vibrating disc, and the material is automatically discharged in the correct direction through the vibrating disc. The handling mechanism automatically takes and places the material onto the product carrier.
ST003 PIN Needle Transport and Insertion Module
Overview:
The PIN pin is automatically transported and inserted into the interior of the product.
Composition: Vibration disk, cylinder
Action description:
Manually place the PIN pin onto the vibrating disc, which automatically discharges the material in the correct direction. The handling mechanism automatically takes the material and places it onto the product carrier. The PIN insertion mechanism presses the PIN pin into the interior of the product.
ST004 Button Carrier Module
Overview:
Implement button conveying, with each workstation working simultaneously, and PLC logic control.
Composition: Motor, cam splitter
Action description:
By rotating the cam splitter, the buttons are transported to various workstations while improving work efficiency.
ST005 grease coating module
Overview:
Apply oil to the inner wall of the product.
Composition: cylinder, grease metering valve
Action description:
After the product carrier is in place, the cylinder sequentially positions the carrier and the product, and the lubricating grease quantitative valve applies oil to the designated position of the product.
ST006 height detection module
Overview:
Check if the height of the inner terminal of the product is qualified.
Composition: cylinder, electric cylinder, displacement sensor
Action description:
After the product carrier is in place, the cylinder sequentially positions the carrier and the product, and the electric cylinder moves to detect whether the terminal height is qualified.
ST007 Grease coating module
Overview:
Apply oil to the inner wall of the product.
Composition: Motor, grease metering valve
Action description:
After the product carrier is in place, the cylinder sequentially positions the carrier and the product, and the motor rotates to drive the lubricating grease quantitative valve to apply oil to the designated position of the product.
ST008 product tray transfer track
Overview:
This machine conveys products through a flat belt and is controlled by PLC logic.
Composition: conveying mechanism, cylinder, product carrier
Action description:
Manually place the product into the product carrier, and the cylinder pushes the carrier to run to each workstation, achieving carrier reflux.
ST009 Finished product conveyor belt
Overview:
The finished product will be transported out of the equipment.
Composition: motor, synchronous belt, sensor, self-made tooling
Action description:
The handling module will take and place the finished product onto the conveyor belt, which will run to transport the product out of the equipment.
Packaging & Shipping
Company Profile
GOTOP -industrial manufacturing automation solutions.
GOTOP always focus on auto parts and motor industry manufacturing automation solutions, whether it is production process automation or production process information systems GOTOP professional technology, provide core technical support to customers.
GOTOP has 59 patents including 7 invention patents (included in the audit) it has passed the National high-tech Enterprise certification the ISO Quality Management System certification the new professional certification, and the certification of small and medium-sized sci-tech enterprises in Shandong province.
GOTOP adheres to the principle of integrity and gratefulness follows the concept of high quality and customer first, accumulates experience constantly enhances r & D strength and creates a bright future with each partner hand in hand!
The competitiveness of the company
research and development:
• Rigorous evaluation and necessary experimental verification
• Build a professional project team
• Continuous improvement in engineering design, Modular rocket
• Keep up-to-date with project progress and feedback
Quality:
• Internal and external design review
• Implement PDCA for material inspection
• Gotop internal acceptance and customer pre-acceptance
• 1 year or above quality assurance
Manufacturing:
• Decompose the assembly process to make it more detailed
• Review the problem every day and make timely improvement
• Unified standard operating procedures and practices
• Implementation of PDCA
Services:
• Technical training
• Long-term free technical support from strategic partners
• Transfer of information and documents
){kind=link}